Extrusion

Extrusion

Side Flow Extruders

The extruders are manufactured with 75, 130, or 200mm diameter screws to achieve throughputs of between 50-1,500 kg/hr via a side flow die configuration. The side flow dies will extrude over widths from 300-1200mm at right angles to the screw axis. Side flow dies can be designed to extrude sheets, ropes and twisted ropes in solid, hollow or co-extruded form.
The side flow design provides a cost effective, high output design with good uniformity of product weight across the die width. The uniformity of the product weight is achieved by careful design of the screw across the die mouth; regulating/throttling plates/screws on the dies and for some products, a positive displacement pump on each rope.
The extruders are usually mounted on rails to position the dies over a retracting nose piece on the BCH high performance cooling tunnels. For die changing and cleaning, the extruders can be wheeled off line.
The main barrel of the extruder is water jacketed to minimise start up times, maximise extrusion efficiency and in the case of the twin screw mixer extruder, provide heat transfer.

BCH's food and confectionery extruders are manufactured in stainless steel to a hygienic and robust design.

Primarily designed to handle liquorice, starch gels, fruit twist and sugar pastes, these extruders can also handle viscous food pastes and gels.
• High Boil Syrups
• Caramels
• Liquorice
• Fudges
• Nougat/Praline
• Gels
• Fat Based Products

Extrusion

Extrusion

Twin Screw Mixer Extruder

This type of extruder enables the mixing of colours, flavours and acid into a cooked liquorice base. Using this type of extruder, colour and flavour contamination of the premix and cooking equipment is eliminated, enabling rapid colour changes, minimal loss of flavour, minimal sugar inversion and starch gel breakdown. The extruder is fitted with a screw extraction system for the rapid and easy cleaning of the extruder.

Continuous or batch fed extruders

The extruder is fitted with a small vacuum inlet hopper to receive liquorice directly from the continuous cooker (Viscotator). The vacuum hopper enables the extrusion of a cooler, drier and firmer liquorice product. When fitted with a larger feed hopper, batch fed product is possible.

Extrusion

BROCHURES
CONTACT US